 |
| Quantity: | |
|---|---|
Main features：
1. C500DF truck mounted drilling rig is a rotary table drilling rig.
2. The truck chassis adopts the special crane chassis of brand DongFeng TRUCK and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed mechanism are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with mud pump which adopts the slurry as the washing fluid and can drill in soil, clay, sand and rock if it is equipped with suitable drilling bit.
4. The power of truck engine transfer to PTO, and then drive drilling rig.
5.The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.
6. According to client’s requirement, the C500DF can carry out down-the-hole hammer drilling with Air Compressor.
7. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, and geothermic well and other foundation working, it is popular at home and abroad.
| Technical parameter | |||
| Drilling depth（M） | 500 | ||
| Drilling diameter（mm） | 200-500 | ||
| Speed of turntable（r/min） | 117；102；60；38；22；13；16(reverse) | ||
| Torque of turntable（KN.m） | 5.4----50 | ||
| Single rope lifting capacity of main windlass(KN) | 50 | ||
| Maximum lifting capacity of main windlass(KN) | 300 | ||
| Single rope lifting capacity of assistant windlass(KN) | 60 | ||
| Single rope lifting capacity of assistant windlass(KN) | 240 | ||
| The lifting capacity of hook（KN） | 300 | ||
| Bearing capacity of drilling tower (KN) | 360 | ||
| The height of drilling tower (mm) | 12500 | ||
| Drill pipe | Kelly bar（mm） | 108×108×7500 | |
| Assistant pipe (mm) | .Ф89×10×5500 | ||
| CBW850-4-80 Mud pump | Theoretical flow (L / min) | 500 600 700 850 | |
| Rated pressure (Mpa) | 7 6 5 4 | ||
| Truck chassis | Drive form | 8×4 | |
| Engine | Model | YC6A260-33YC water -cooled four strok diesel engine | |
| Rated power（KW） | 191 | ||
| Speed （r/min） | 2300 | ||
| Size （L*W*H）(mm) | 11510*2480*2800 | ||
| The highest speed（Km/h） | 75 | ||
| Weight （kg） | 25500 | ||
| Transport size（L*W*H）(mm) | 12550×2500×4150 | ||
Main features：
1. C600 Y truck mounted drilling rig is a rotary table drilling rig.
2. The truck chassis adopts the special crane chassis of brand SINO TRUCK and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed mechanism are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with WB1200/12 mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
4. The power of truck engine transfer to PTO, and then drive drilling rig.
5. We install the spare electric engine and clutch implement, so that the rig can work with diesel engine or electric engine.
6. We set up a generator (MF) which is convenient to illuminate or work at night.
7. The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.
8. According to client’s requirement, the CY600 Y can carry out down-the-hole hammer drilling with Air Compressor.
9. The appearance of rig is pretty. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, and geothermic well and other foundation working, it is popular at home and abroad.
| Technical parameter | |||
| Drilling depth（M） | 600 | ||
| Drilling diameter（mm） | 200-500 | ||
| Speed of turntable（r/min） | 117；102；60；38；22；13；16(reverse) | ||
| Torque of turntable（KN.m） | 5.4----50 | ||
| Single rope lifting capacity of main windlass(KN) | 50 | ||
| Maximum lifting capacity of main windlass(KN) | 300 | ||
| Single rope lifting capacity of assistant windlass(KN) | 60 | ||
| Single rope lifting capacity of assistant windlass(KN) | 240 | ||
| The lifting capacity of hook（KN） | 300 | ||
| Bearing capacity of drilling tower (KN) | 300 | ||
| The height of drilling tower (mm) | 12500 | ||
| Drill pipe | Kelly bar（mm） | 108×108×7500 | |
| Assistant pipe (mm) | .Ф89×10×5500 | ||
| 3NB-130 Mud pump | Diameter of cylinder (mm) | 100-140 | |
| Stroke of piston (mm) | 160 | ||
| Theoretical flow (L / S) | 8.4 10.3 12.2 14.3 16.6 | ||
| Rated pressure (Mpa) | 10 8 7 6 5 | ||
| Diameter of suction tube (mm) | 152 | ||
| Diameter of drain pipe (mm) | 65 | ||
| Input power (kw) | 95 | ||
| Truck chassis | Drive form | 8×6 | |
| Engine | Model | YC6A260-33YC water -cooled four strok diesel engine | |
| Rated power（KW） | 191 | ||
| Speed （r/min） | 2300 | ||
| Size （L*W*H）(mm) | 11510*2480*2800 | ||
(II-1) MODEL: C350ZYII (300meter depth; diameter hole: 8-22inch)
(II-2)MODEL: C400ZYII (400meter depth; diameter hole: 8-22inch)
(II-3) MODEL: C500DF (500meter depth;diameter hole: 8-22inch )
(II-4) MODEL: C600 Y (600meter depth;diameter hole: 8-22inch )
(II-5) MODEL: SPT-300(depth: 300meter)
(II-6) MODEL: SPT-400(depth: 400meter)
(II-7) MODEL: SPT-600(depth: 600meter)
(II-7) MODEL: SCT-1000(depth: 1000meter)
TRAILER MOUNTED WATER WELL DRILLING RIG
1. It's a turntable type rotary drilling rig which is mainly applied to water well, construction, national defense building foundation, geological exploration, geothermic well and other projects with holes.
2. . The base machine, mud pump and motor engine are installed in a specially designed semi-trailer chassis which can be easily and quickly moved
3. The rig is driven by mechanical transmission, simple operation, economical transportation and reliable to use, easy maintenance, etc.
4. Power force is from the diesel engine or motor engine which can be easily used outdoors
5. The rotary table can provide six different speeds which can meet the requirement of different stratigraphy drilling and it will be beneficial to improve rig efficiency
6. The rig can erect by itself, convenient and reliable
7. The main winch and deputy winch are all using a planetary gear structure which can be operated conveniently and reliably
8. The rig is equipped with generators for the using of lighting, welding machine etc.
9. Drill chassis use traction device which can be towed by the general tractors
we provide drilling rigs for sale,you can know it.
Main features：
1. C500DF truck mounted drilling rig is a rotary table drilling rig.
2. The truck chassis adopts the special crane chassis of brand DongFeng TRUCK and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed mechanism are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with mud pump which adopts the slurry as the washing fluid and can drill in soil, clay, sand and rock if it is equipped with suitable drilling bit.
4. The power of truck engine transfer to PTO, and then drive drilling rig.
5.The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.
6. According to client’s requirement, the C500DF can carry out down-the-hole hammer drilling with Air Compressor.
7. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, and geothermic well and other foundation working, it is popular at home and abroad.
| Technical parameter | |||
| Drilling depth（M） | 500 | ||
| Drilling diameter（mm） | 200-500 | ||
| Speed of turntable（r/min） | 117；102；60；38；22；13；16(reverse) | ||
| Torque of turntable（KN.m） | 5.4----50 | ||
| Single rope lifting capacity of main windlass(KN) | 50 | ||
| Maximum lifting capacity of main windlass(KN) | 300 | ||
| Single rope lifting capacity of assistant windlass(KN) | 60 | ||
| Single rope lifting capacity of assistant windlass(KN) | 240 | ||
| The lifting capacity of hook（KN） | 300 | ||
| Bearing capacity of drilling tower (KN) | 360 | ||
| The height of drilling tower (mm) | 12500 | ||
| Drill pipe | Kelly bar（mm） | 108×108×7500 | |
| Assistant pipe (mm) | .Ф89×10×5500 | ||
| CBW850-4-80 Mud pump | Theoretical flow (L / min) | 500 600 700 850 | |
| Rated pressure (Mpa) | 7 6 5 4 | ||
| Truck chassis | Drive form | 8×4 | |
| Engine | Model | YC6A260-33YC water -cooled four strok diesel engine | |
| Rated power（KW） | 191 | ||
| Speed （r/min） | 2300 | ||
| Size （L*W*H）(mm) | 11510*2480*2800 | ||
| The highest speed（Km/h） | 75 | ||
| Weight （kg） | 25500 | ||
| Transport size（L*W*H）(mm) | 12550×2500×4150 | ||
Main features：
1. C600 Y truck mounted drilling rig is a rotary table drilling rig.
2. The truck chassis adopts the special crane chassis of brand SINO TRUCK and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed mechanism are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with WB1200/12 mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
4. The power of truck engine transfer to PTO, and then drive drilling rig.
5. We install the spare electric engine and clutch implement, so that the rig can work with diesel engine or electric engine.
6. We set up a generator (MF) which is convenient to illuminate or work at night.
7. The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.
8. According to client’s requirement, the CY600 Y can carry out down-the-hole hammer drilling with Air Compressor.
9. The appearance of rig is pretty. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, and geothermic well and other foundation working, it is popular at home and abroad.
| Technical parameter | |||
| Drilling depth（M） | 600 | ||
| Drilling diameter（mm） | 200-500 | ||
| Speed of turntable（r/min） | 117；102；60；38；22；13；16(reverse) | ||
| Torque of turntable（KN.m） | 5.4----50 | ||
| Single rope lifting capacity of main windlass(KN) | 50 | ||
| Maximum lifting capacity of main windlass(KN) | 300 | ||
| Single rope lifting capacity of assistant windlass(KN) | 60 | ||
| Single rope lifting capacity of assistant windlass(KN) | 240 | ||
| The lifting capacity of hook（KN） | 300 | ||
| Bearing capacity of drilling tower (KN) | 300 | ||
| The height of drilling tower (mm) | 12500 | ||
| Drill pipe | Kelly bar（mm） | 108×108×7500 | |
| Assistant pipe (mm) | .Ф89×10×5500 | ||
| 3NB-130 Mud pump | Diameter of cylinder (mm) | 100-140 | |
| Stroke of piston (mm) | 160 | ||
| Theoretical flow (L / S) | 8.4 10.3 12.2 14.3 16.6 | ||
| Rated pressure (Mpa) | 10 8 7 6 5 | ||
| Diameter of suction tube (mm) | 152 | ||
| Diameter of drain pipe (mm) | 65 | ||
| Input power (kw) | 95 | ||
| Truck chassis | Drive form | 8×6 | |
| Engine | Model | YC6A260-33YC water -cooled four strok diesel engine | |
| Rated power（KW） | 191 | ||
| Speed （r/min） | 2300 | ||
| Size （L*W*H）(mm) | 11510*2480*2800 | ||
(II-1) MODEL: C350ZYII (300meter depth; diameter hole: 8-22inch)
(II-2)MODEL: C400ZYII (400meter depth; diameter hole: 8-22inch)
(II-3) MODEL: C500DF (500meter depth;diameter hole: 8-22inch )
(II-4) MODEL: C600 Y (600meter depth;diameter hole: 8-22inch )
(II-5) MODEL: SPT-300(depth: 300meter)
(II-6) MODEL: SPT-400(depth: 400meter)
(II-7) MODEL: SPT-600(depth: 600meter)
(II-7) MODEL: SCT-1000(depth: 1000meter)
TRAILER MOUNTED WATER WELL DRILLING RIG
1. It's a turntable type rotary drilling rig which is mainly applied to water well, construction, national defense building foundation, geological exploration, geothermic well and other projects with holes.
2. . The base machine, mud pump and motor engine are installed in a specially designed semi-trailer chassis which can be easily and quickly moved
3. The rig is driven by mechanical transmission, simple operation, economical transportation and reliable to use, easy maintenance, etc.
4. Power force is from the diesel engine or motor engine which can be easily used outdoors
5. The rotary table can provide six different speeds which can meet the requirement of different stratigraphy drilling and it will be beneficial to improve rig efficiency
6. The rig can erect by itself, convenient and reliable
7. The main winch and deputy winch are all using a planetary gear structure which can be operated conveniently and reliably
8. The rig is equipped with generators for the using of lighting, welding machine etc.
9. Drill chassis use traction device which can be towed by the general tractors
we provide drilling rigs for sale,you can know it.
