HYDRAULIC ROTATING LINER HANGER
Product Description
Liner hanger Main technical parameters
| Specification | Φ244.5×Φ177.8 【9 5 / 8”⊃2; ⊃2;×7”⊃2; ⊃2; 】 |
| Rated load | 160t |
| Applicable upper casing range | 53.5ppf |
| Sealing ability of pack off | 35MPa |
| Shear pressure of cylinder pins | 7～9Pa |
| Material | P110 |
| Liner hanger down connection | Blank |
| Max O.D. of body | 215mm |
| I.D. of body | 152.5mm |
| O.D. of the packer rubber | 208 mm |
| Packer sealed bearing | 70Pa |
| Shear force of packer pins | F14/23 |
| Temperature resistance | 350°F（180℃） |
| Material of the tieback PBR | P110 |
| O.D. of the tieback PBR | 210mm |
| I.D. of the tieback PBR | 190mm |
| Length of the tieback PBR | 15Ft (1830 mm) |
| The minimum bore into a seating tool | F70mm |
| Up connection of running tool | 4-1/2″IF Box |
| Release pressure of the HNG running tool | 14MPa |