SLAB GATE VALVE
Product Description
Slab Gate Valve
• Full bore design can efficiently solve the problem of pressure drop and vortex,and slows down the process of erosion resulting from the solid particles in the fluid.
• Mental-to-mental seal is used between bonnet and body, gate and seat, body and seat.
• The surface of gate and seat is overlaid with hard alloy makes the valve with high performance of anti-corrosion and anti-wear.
• This kind of valve is designed with balancing stem, with which can balance stem load, also, reduce the load of stem thread and bearing to lower the operating torque.
• The stem designed with back seal construction, can easily replace stem seal ring under pressure.
• One side of bonnet is designed with injection valve in order to replenish sealing grease, moreover, to improve seal and lubrication performance of gate and seat.
• The rising stem structure can indicate the position of valve open/close.
• Can complete with different pneumatic(hydraulic) actuator as per user's requirements.
• Full bore design can efficiently solve the problem of pressure drop and vortex,and slows down the process of erosion resulting from the solid particles in the fluid.
• Mental-to-mental seal is used between bonnet and body, gate and seat, body and seat.
• The surface of gate and seat is overlaid with hard alloy makes the valve with high performance of anti-corrosion and anti-wear.
• This kind of valve is designed with balancing stem, with which can balance stem load, also, reduce the load of stem thread and bearing to lower the operating torque.
• The stem designed with back seal construction, can easily replace stem seal ring under pressure.
• One side of bonnet is designed with injection valve in order to replenish sealing grease, moreover, to improve seal and lubrication performance of gate and seat.
• The rising stem structure can indicate the position of valve open/close.
• Can complete with different pneumatic(hydraulic) actuator as per user's requirements.